Target Retrieval Systems

(440) 942-8636

Installation & Quote Checklist

The following checklist is useful to determine your final costs and installation requirements. Whether you intend to install the systems yourself or have the Rogue Six team do it for you, the following questions provide the key to a good start.

  • How is your roof constructed? Do you have wooden trusses, bar joists or another style of construction?
  • Do you currently have an existing target system? If so, is it a cable system or rail system?
  • If you currently have a cable system in place, what type of mounting systems are available at either end of the range?
  • Do you have shooting stalls? If so, what type and how are they constructed? Remember, a good mounting surface for the handwheel is important. Luckily, the Rogue Six system is flexible enough to be mounted to most existing stalls or any flat surface which is stable.
  • How high is your ceiling from floor to trusses?
  • Do you have baffles already in place? If so, how high are the lower edges of the baffles from the floor?
  • Do you have a bulkhead or other laterally mounted support structure running across each lane on the stall side of your range? Note: If an existing surface is not present, a lateral surface is always necessary to mount the upper pulley assembly. You can see some photos of the assembly on the photo page.
  • Do you have a power source available for installation? Is it 110V or 220V?
  • Do you have experience welding or have a welder available? Typically, some welding is required during the course of installation. This varies from site to site of course.
  • Is an entryway available to accommodate steel rails in 20-foot lengths? Although not necessary, it is advantageous to assemble the rails using the longest lengths you can.
  • What length is your range from the shooter stalls to the bullet trap?
  • If you have an existing target retrieval system in place and plan on having Rogue Six install your new ones, will you be removing the old systems yourself?
  • Photos Requested:
  • Shooting Stalls
  • Ceiling/Roof construction
  • Baffles
  • Front/Rear mounting points of existing system
Website design by ATX Webmasters